Another rare shaded diamond is the Red Diamond. It is a diamond that shows identical properties of lackluster diamonds but with red shading. They are generally known as the world’s costliest, and uncommon shade of diamonds, more so than Pink diamonds or Blue diamonds which almost all of us are aware of.
It resembles pink diamonds and is exceptionally bantered with regards to the wellspring of their shading, yet the gemological network, most as often as possible, credits the two hues to colliding atoms in the structure of the diamond as it goes through colossal pressure during its development.
They are among the twelve shades of extravagant diamonds, the most costly per carat cost. They ordinarily run in the scope of hundreds of thousands of dollars for each carat. Since they are the most uncommon shading, they are elusive in enormous sizes and are generally found in sizes under 1 carat.
Table of Contents
Where is a red diamond found?
Being expensive and rare, red diamonds are usually located in their source mines. Each year, most of them are excavated from Kimberley and Western Australia’s Argyle diamond mine, and in countries like Brazil, Russia, and some African countries.
How much is a red diamond worth?
Out of all the sorts of diamonds present on this planet, the red one is the most extraordinary, even astounding the pink precious stones. So, owing to this, the primary inquiry that may strike a chord is “what is the red precious stone’s cost?”
We all realize that these precious stones are among the most costly and uncommon jewels on the planet, yet what is a red jewel’s cost for every carat? Let’s consider some examples to know this. The 0.95-carat Hancock red diamond was swapped for $880,000 in 1987 (you can just envision what it must be worth at this point).
The 5.03-carat De Young red diamond’s worth is nearly $5 million dollars today. The 5.11-carat Moussaieff red diamond was sold for $8 million dollars in 2001 and assessed to be worth almost $20 million today! So, with these, you must have got an idea of their worth.
How rare are red diamonds?
Red precious stones are uncommon to the point that somewhere in the range of 1957 and 1987, no jewels with an unadulterated red shading were evaluated by the Gemological Institute of America. This GIA lab is known for its reviews on a larger number of jewels than some other labs on the planet, and the way that no clear-headed reds were submitted for evaluation over a 30-year time span. This is a solid demonstration of their extraordinariness on this planet.
The Argyle Mine, the main founder of red precious stones, came online in December of 1985, and that is the point at which a couple of red jewels every year began showing up at the GIA research facility. From that point forward, the Argyle mine has created in any event 90% of the world’s red jewels.
Marginally less uncommon are jewels with a modified red shading. Changing hues incorporate earthy colored, purple, and orange. These produce jewels that are caramel red, purplish-red, and orangey-red.
The jewel market may have a considerably more set number of new red stones entering the market in light of the fact that the Argyle Mine is relied upon to shut anytime soon in 2020. At present, no new wellsprings of even periodic red precious stones are known.
Why is a red diamond cut?
To amplify the measure of red light transmission, red stones undergo regular slicing with their tables corresponding to the shading creating glide planes. This boosts the measure of light crossing the glide planes as beams of light slip through the table and down into the jewel. Quite a bit of this light reflects from structure facets and goes back up toward the table, going through those equivalent glide planes, thus creating a way to gather more shading.
Appropriate arranging and cutting are significant for all hued jewels, however, it is particularly significant in the case of red diamonds. Appropriate cutting can deliver a more soaked and even shading when the jewel is seen from its face-up position.
How to evaluate the synthetic red diamonds?
The reason why most of the customers prefer to go with synthetic red diamonds is that you get more alternatives with respect to weight (carat), shading, clarity, and cut of the precious stone. The following is a concise rundown of these aspects when purchasing such stones:
Carat
When in doubt, the higher the carat (weight), the more valuable the jewel is. Red precious stones specifically seldom come in extraordinary sizes. It is along these lines safe to state that red jewels are an exemption to this standard. Actually, the biggest known red precious stone known today is the Moussaieff red diamond measuring 5.11 carats. All other genuine red jewels are not exactly a carat in size. Nonetheless, synthetic red jewels give more choices and you might have the option to discover a somewhat bigger stone as per your desires.
Shading and clarity
Clarity is what I would claim a huge factor with regards to shaded stones alongside shading. You might need to focus on how red jewels look in changed lighting conditions when buying. For instance, they look best in the sunshine and most exceedingly awful in bright light.
Cut
A jewel’s cut can fundamentally influence how brilliantly it sparkles under the light. The dependable guideline is to pick a cut that would expand the light that goes through the jewel to more readily mirror its shading. On account of red precious stones, they come best in radians and ovals that underline the red shading. The round shape, interestingly, will in general, lower the saturation.
FAQs
Which is the largest red diamond known?
The largest red diamond known today is the Moussaieff Red diamond.
What are the different types of red diamonds?
Some commonly found red diamonds are Kazanjian Red diamond, Moussaieff Red diamond, De Young Red diamond, & Graff Purplish-Red diamond.
Are red diamonds expensive?
Yes, owing to their rarity and size, red diamonds are one among the most expensive jewels mined to date.
